Product introduction >Product introduction
> Hydraulic cylinder
  
 

¡Ø You can see product photographs, drawings and site photographs by clicking on photographs
¡¡
Product description
Use: There is a hole at the center of plunger of cylinder, to which a rod can be put and fixed.
When the plunger advances forward, the rod will operate to perform pushing and pulling work.
It can be used as a jig device for various machines such as hydraulic gear puller bridge rope pulling, hydraulic punching compressor fixing bolt fixing.
For double-action cylinder of capacity 100 ton or higher, a safety valve is basically installed for protection of the cylinder and safety in case of pressure overload

  • Double-acting, Hydraulic return type
  • Stroke : 150mm
  • Capacity (ton) : 30 ~ 100 ton
  • Pressure used : 700 bar
  • Coupler : 3/8" PT
  • Special cylinders can be custom-manufactured
    		•
    Product specification
    Model Cylinder
    Capacity
    (tons)    		 Stroke
    (mm)    		 Cylinder
    Effective
    Area(§²)    		 Oil
    Capacity
    (cc)    		 Retracted
    Height    		 Extended
    Height    		 Cylinder
    Out Dia.    		 Center
    Hole Dia.    		 Weight
    (kgs)
    A B C D
    SDCH-30150 30 150 44.2 663 310 460 115 33 22
    SDCH-50150 50 150 70.9 1063.5 315 465 164 54 43
    SDCH-100150 100 150 132.7 1990.5 370 520 226 80 78.5