Product introduction >Product introduction
> Hydraulic cylinder
  
 

¡Ø You can see product photographs, drawings and site photographs by clicking on photographs
¡¡
Product description

Use: There is a hole at the center of plunger of cylinder, to which a rod can be put and fixed. When the plunger advances forward, the rod will operate to perform pushing and pulling work. It can be used as a jig device for various machines such as hydraulic gear puller bridge rope pulling, hydraulic punching compressor fixing bolt fixing

  • Single-acting, Spring return type

  • Stroke : 45 ~ 75mm

  • Capacity (ton) : 10 ~ 100 ton

  • Capacity (ton) : 10 ~ 100 ton

  • Special cylinders can be custom-manufactured
  • Coupler : 3/8" PT
    		•
    Product specification
    Model Cylinder
    Capacity
    (tons)    		 Stroke
    (mm)    		 Cylinder
    Effective
    Area(§²)    		 Oil
    Capacity
    (cc)    		 Retracted
    Height    		 Extended
    Height    		 Cylinder
    Out Dia.    		 Center
    Hole Dia.    		 Coler Thread Coller Thread length Weight
    (kgs)
    A B C D E F
    SCH-1041 10 41 17.6 70.5 121 162 70 20 - - 2.8
    SCH-2050 20 50 31.67 158.4 162 212 98 27 - - 7.6
    SCH-3063 30 63 47.7 300.6 179 242 115 33 M48XP1.5 20 10.9
    SCH-5075 50 75 85.5 650 235 310 159 54 M70XP2 28 27.2
    SCH-10075 100 75 143.13 1049 254 329 216 80 M103XP2 28 52.5